Replies to This Discussion

Permalink Reply by Christopher Cooper on November 11, 2012 at 7:33pm

I reflashed the firmware and reset the EEPROM before I went flying yesterday. Logs were even crazier this time. The log menu in the CLI gave me this:

12 logs
Log -23659, start 1, end 1
Log -23658, start 1, end 1

The only way to download the log was to dump to the CLI. I've attached what I got, but I can't make any sense of it. The KMZ that this log creates is meaningless.

I'd really appreciate if someone could let me know what might be going wrong here.

• ▶ Reply

Permalink Reply by Christopher Cooper on November 11, 2012 at 7:42pm

Apologies, log now uploaded. Had to trim it to <7MB

Attachments:

• 2012-11-11-recovered 2.log, 7 MB

• ▶ Reply

Permalink Reply by Christopher Cooper on November 16, 2012 at 3:19pm

Any ideas? Is there a better place to be posting this? Not sure if its arducopter or mission planner that's giving me problems.

• ▶ Reply

Permalink Reply by Bill Patterson on November 16, 2012 at 3:55pm

Actually, I tried to use APM Log Visualizer, and I got thousands of bad lines.

So something is up.

[Edit] Using my own 2.8.1 logs I mean.

http://diydrones.com/forum/topics/apm-log-visualizer-source-code?co...

• ▶ Reply

Permalink Reply by Christopher Cooper on November 16, 2012 at 6:29pm

Thanks, at least it's not just me. Does the mission planner log browser work for you?

• ▶ Reply