I'm building up my quad with a tilt stabilized gimbal (HK) and a want to control the angle with a separate channel. The stabilization works ok when the servo is connected at ch.11 at the APM2.5 board, but adding the control channel (Input Ch8) gives a no go..
I've allready calibrated the channels, put in the parameters in the config. The servo works ok in receiver channel 8 (not on the board), OR in option control channel 11 but not when input channel 8 is chained to the APM board..
Should it be possible to control the tilt angle with a separate channel and still keep it stabilized or are the channel 11 and the input channel on the board mutual exclusive?