GPS and Arduimu problem.
in the groundstation server screen data is comeing in good but the gps data is all zeros. im useing your ublox satelite adapter and your board to attach to the arduimu. i checked all my code and everything looks good but i cant get a lock. iv tried this all over not just in my lab room even outside i get the same problem. only thing i didnt check is if the ublox is configured correctly but i figured it would be becasue i got it from you guys. nt sure what other data i can give you just let me know. have attached a screen shot of my groundstation running
ps. lights all flicker on and off in series then it goes silent with just one green led on.
ps. lights all flicker on and off in series then it goes silent with just one green led on.
- Attachments:
-
-
arduimu-problem.gif, 113 KB
-
Replies to This Discussion
-
DeveloperPermalink Reply by Doug Weibel on -
Hi Mario,
If you get a blue LED the IMU is getting GPS data and you have a lock. Check that you have #define PRINT_GPS 1 (not 0) in the code. You can turn on or off portions of the output data with the #define statements.
-
Permalink Reply by Mario on -
Thanks Doug ! You were right on... The change from 0 to 1 in that line #define PRINT_GPS 1 did the trick. I now have GPS readings.
Regards
Mario
-
Permalink Reply by shawn vatcher on
-
i think in the earlier version that problem was a bug that has been fixed in the latest version wich doesnt reuire a gps i think cause it worked fine for me.
- ‹ Previous
- 1
- 2
- Next ›
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
ArduCopter User Group
1276 members
-
ArduCopter (traditional …
179 members
-
South African DIY Drones…
57 members
-
ArduRover User Group
183 members
-
Moderators
24 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
