Gyros Continuous Rolling In All Axis

Mega setup in a quad copter. Was working just fine. Now when I hook up to APM via USB or XBEE my attitude indicator just keeps rolling after a few minutes it will stabilize.

Any suggestions?

 

Mark H.

Views: 38

▶ Reply to This

Replies to This Discussion

Permalink Reply by Mark H on August 11, 2011 at 8:53pm

here are logs this is with quad just sitting on table

Attachments:
Permalink Reply by Mark H on August 11, 2011 at 9:25pm

Guess my magnetometer is toast. After disabling it's nice and stable now.

Permalink Reply by Mark H on August 11, 2011 at 9:43pm

Disregard!

My setup didn't load or something. After running through setting everything up it works just fine. Even took a short flight and it was OK.

RSS

Social Networking

Top Content 

1 ArduPlane 2.73 released

ArduPlane 2.73 released
2 How to analyze a crash?

How to analyze a crash?
3 ArduVTOL

ArduVTOL
4 NEVER connect a Capacitor backup or voltage protector on APM board

NEVER connect a Capacitor backup or voltage protector on APM board
5 HD video for UAV's

HD video for UAV's
6 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
7 DIYDrones Chat Feature Info

DIYDrones Chat Feature Info
8 Arducopter Question

Arducopter Question
9 Arducopter 3Dr or Phantom

Arducopter 3Dr or Phantom
10 ArduVTOL - Wingcopter - Flight Report Nr.1

ArduVTOL - Wingcopter - Flight Report Nr.1

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service