Help needed to troubleshoot Ardustation
Hi,
Previously, I am unatble to get my newly purchased ardustation working. Initially, I suspected that there is no source code been loaded onto the Uno chip on my board. After some help from the experts here, I am able to compile and upload 2.0.11 onto Uno chip. However, I am still unable to get the board working. My board status are as follows:
PWR LED "ON"
ASC LED "OFF"
RSS LED "OFF"
No display on the LCD even after adjusting both potential meters on the board and pushing the reset button numerous times.
Please help and thanks in advance.
hobc100
Replies to This Discussion
-
Permalink Reply by Ming Cang on -
Hi ya'll,
I have that same problem too, only the Power LED lights up the other 2 don't even after successfully compiling and uploading the 2.0.11 Ardustation 2 Source code anyone knows how to solve this problem ? Help would be greatly appreciated.
Thanks in advance to whomever replies
~Ming~
-
Permalink Reply by Heino R. Pull on -
Check the LCD contrast control. It will display nothing if the potentiometer is rotated all the way in one direction or the other. This is a common problem in the Ardustation assembly. It should be rotated until the displays contrast can show characters.
Heino
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
German Ardu-Group
106 members
-
ArduCopter User Group
1279 members
-
ArduPlane User Group
671 members
-
ArduRover User Group
183 members
-
Andropilot Users Group
182 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
