Replies to This Discussion

DeveloperPermalink Reply by Michael Oborne on August 21, 2012 at 5:13am

when  playing back a tlog, the wps shold appear on screen if they where downloaded during that tlog

• ▶ Reply

Permalink Reply by Bruce Jones on August 21, 2012 at 10:54am

How can you make sure they are downloaded?

Here's a recent tlog of mine, it doesn't appear to contain waypoints.  I'd love to get them included in these.

Attachments:

• 2012-05-25 20-03-49.tlog, 336 KB

• ▶ Reply

Permalink Reply by Max Turnoff on August 23, 2012 at 5:55am

When the tlog gets terminated? When Mavlink connection is lost?

Does it mean that if I loaded mission on the bench, then unpowered board, then powered and flew in Auto mode, the way points won't be shown?

• ▶ Reply

Permalink Reply by Ger Harris on August 24, 2012 at 10:52am

If you are connected to your APM with current way points:

1) Go to "Flight Planner"

2) "Read WPs" to download way points

3) Geo-Fence "Download" to get geo-fence if used 

4) Go to "Flight Data" -> "Telemetry Logs" -> Load your log and play

5) It should play on the main "Flight Data" screen

Without being connected to your APM:

1) Go to "Flight Planner"

2) "Load WP File" to get way points (you did save your WP missions right?)

3) Geo-Fence "Load from file" to get geo-fence if used 

4) Go to "Flight Data" -> "Telemetry Logs" -> Load your log and play

5) Go back to "Flight Planner" and watch your plane interact with your way points.

No idea at all for Google Earth.

I hope that is what you were asking for.  : )  

• ▶ Reply