Hi All,

I'm building an RCexplorer style Tri with a AMP2.5, Turnigy9x (in airplane mode) and all the other HK.com stuff I need. I'm running Arducopter V2.9.1b and everything seems to work great (Pitch,Roll, throttle), except the yaw servo. In failsafe there is no output to channel 7 no matter the Yaw input from the Tx or movement of the AMP.

I'm hoping there's some setup step I missed somewhere but I've been through most of the relevant wiki pages an nothing seems to pop out at me.

Hope some one can help me out!

Thanks

Geoff

TLDR: AMP2.5, V2.9.1b tri, Turnigy 9x, no output to channel 7 / yaw servo

Tags: Tri, not, servo, working, yaw

Views: 648

Reply to This

Replies to This Discussion

I solve the problem. The APM 2.6 needs an extra power source to power the servo. You can also short JP1.

I solve the problem. The APM 2.6 needs an extra power source to power the servo. You can also short JP1.

I just ran a connector from my receiver battery port to the output number 8.

RSS

© 2014   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service