Inverted Roll in Mission Planner.

Hi,

 

My mission planner 1.1.40 seems inverted on the roll. When I lean my quad to the left, the mission planner shown it lean to the right (Horizontal bar lean to right). The roll value shown negative in the mission planner status window.

I'm using Arducopter 2.4.1 and I fly in stabilize mode very well, so i guess no issue with my radio or arducopter setting.

 

Thanks

 

Yovi

Views: 122

▶ Reply to This

Replies to This Discussion


DeveloperPermalink Reply by Michael Oborne on February 23, 2012 at 6:31pm

if you where sitting in the quad, what would the horizon look like? it is correct.

Permalink Reply by yovio on February 23, 2012 at 6:40pm

I'm sorry I don't get your question. Btw, I took a picture of both the quad and mission planner. This time I make the quad leab to the right.

The roll value shown positive 18

Permalink Reply by davidbuzz on February 23, 2012 at 10:06pm
what you are seeing is normal and correct. it is showing you what the horizon would look like from onboard the aircraft.
Permalink Reply by yovio on February 23, 2012 at 10:12pm

I just get confused with this matter and was afraid something wrong.

Thanks to clarify.

RSS

Social Networking

Top Content 

1 ArduPlane 2.73 released

ArduPlane 2.73 released
2 ArduVTOL

ArduVTOL
3 How to analyze a crash?

How to analyze a crash?
4 HD video for UAV's

HD video for UAV's
5 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
6 Arducopter 3Dr or Phantom

Arducopter 3Dr or Phantom
7 Mapping Mission Ride Along

Mapping Mission Ride Along
8 ArduVTOL - Wingcopter - Flight Report Nr.1

ArduVTOL - Wingcopter - Flight Report Nr.1
9 Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)

Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)
10 NEVER connect a Capacitor backup or voltage protector on APM board

NEVER connect a Capacitor backup or voltage protector on APM board

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service