Location of DXF files for 3DR Quad Kit?
Can someone point me to the DFX files for the frame board, carrier board, landing gear, and arms of the new 3DR Quad kit?
I thought the dxf files and other CAD files were stored over in the Google site with the source code, but it doesn't look like that's the case any longer.
Replies to This Discussion
-
Permalink Reply by Craig Treubig on -
did you ever find them?
-
Permalink Reply by Craig Treubig on
-
I have them for 3dr kit if you need.
-
Permalink Reply by Craig Treubig on
-
Permalink Reply by Craig Treubig on
-
can you convert to dxf?
-
Permalink Reply by Ruben Wijnhoven on
-
Now we need those of the motor mounts and we are good to go.
-
Permalink Reply by Todd on
-
Not having all of the files (especially the arms) it is hard to tell what the motor to motor diameter is... I thought this would have been a good use for the code repository. Did these files just get forgotten when the repository changed?
If anyone out there knows what size quad the software/hardware was developed on, please chime in. Building my own frame and want to be in the ballpark.
Thanks
Todd
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
Moderators
24 members
-
ArduCopter User Group
1289 members
-
Telemetry over cellular …
248 members
-
South African DIY Drones…
57 members
-
ArduCopter Italian Group
87 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
