Magnetometer and GPS not working

Today I got the Magneto unit. So I soldered the Magneto to the IMU. But when I run "c" command in CLI mode. I can only get 0 vaule in all fields like the picture below. Do you think my Magneto is damaged?

 

Also, my MediaTek not working. I used the FTDI cable connected the MediaTek unit to the computer as wiki.Then I try to flash the firmware. I always got error message. I also use the test program in the firmware zip file folder. I left the GPS for hours near the window so it can easily get GPS signal. It still can not get GPS data fixed.

 

I did a test fly with no GPS and Magneto on board (http://www.diydrones.com/profiles/blogs/finally-up-in-the-air). The IMU working when it is fly. But I can not say the problem is Magneto. Since they are working together.

 

Can I send back the IMU, Magneto and GPS to get diagnose?

 

Views: 104

▶ Reply to This

Replies to This Discussion


3D RoboticsPermalink Reply by Chris Anderson on February 1, 2011 at 8:23am
Cyber: did you select the right GPS in the config file? If you have a new MediaTek that should be GPS_PROTOCOL_MTK16.

BTW, I don't think the new MediaTeks are supported by ArduCopter RC2, but they are supported by ArduPiratesNG and APM of course. If you're using ArduCopter, we recommend that you use the ArduPirates NG code, not ArduCopterNG. This is in the manual: http://code.google.com/p/arducopter/wiki/Quad_LoadingPage
Permalink Reply by CyberCrash on February 1, 2011 at 8:26am

Oh, I did not.

 

In the manual? Okay. I used the wiki until now. But all there is about the mediatek is how to update.

 

I didn't know there was a manual. I will look for it. Thanks

RSS

Social Networking

Top Content 

1 Mapping Mission Ride Along

Mapping Mission Ride Along
2 APM 2.5 from hobbyking

APM 2.5 from hobbyking
3 Alt_hold and loiter acting crazy

Alt_hold and loiter acting crazy
4 Looking for best laptop screen to see in the sun

Looking for best laptop screen to see in the sun
5 New micro-cameras emulate insects' compound eyes

New micro-cameras emulate insects' compound eyes
6 ArduPlane 2.73 released

ArduPlane 2.73 released
7 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
8 3 axis Camera Gimble connections.

3 axis Camera Gimble connections.
9 Thirty Days (#17): 12-rotor close up

Thirty Days (#17): 12-rotor close up
10 Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)

Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service