Replies to This Discussion

Permalink Reply by Jason Yerian on September 26, 2010 at 4:39am

Looks like your not getting the library's loaded in Arduino. Make sure you have Sketchbook setup on your computer. If you do, check to make sure the settings in the Arduino preferences is set to "C:\Users\?????\Desktop\Sketchbook"

• ▶ Reply

Permalink Reply by Peter Koppendorfer on September 26, 2010 at 9:43am

Hello
now it looks like this

Thanks
Peter

Attachments:

• Unbenannt.JPG, 68 KB

• ▶ Reply

Permalink Reply by Jason Yerian on September 26, 2010 at 12:54pm

You need to roll up to the top of the error's so I can see where it starts.

• ▶ Reply

Permalink Reply by Jason Yerian on September 26, 2010 at 9:53pm

Also doesnt look like your running the most recent code. Right click on the Sketchbook folder on the desktop and click update to get the latest code.

• ▶ Reply

Permalink Reply by Peter Koppendorfer on September 27, 2010 at 3:09am

I have the latest update in my sketchbook.

i can upload the demo file, no proplem !

i just can not load the Autopilot file and also not the IMU test file !

i spend 8 h jesterday RRRRRRRRR!!!!!!!!!

Thanks
Peter

• ▶ Reply

Permalink Reply by Jason Yerian on September 27, 2010 at 4:20am

Try copying the library file out of the sketchbook folder and paste it in the Arduino library folder at "C:\Program Files (x86)\arduino-0019\libraries "

Should look like this...

Attachments:

• lib.jpg, 544 KB

• ▶ Reply

Permalink Reply by Jason Yerian on September 27, 2010 at 4:33am

Also I had to add to the AMP code to keep from getting errors....

Where the error shows up in the Arduino, go to the top of the first few lines of the error and post the pic of this. Most of the time you can see what the error starts out as and fix it from there.

The code you should have loading is ArduPilotMega Version 1.0.3 Public Alpha, it will say it at the top of the ArduPilotMega tab.

Attachments:

• code.jpg, 304 KB

• ▶ Reply

Permalink Reply by Peter Koppendorfer on September 27, 2010 at 1:34pm

hello

the pic !

thanks
peter

Attachments:

• Unbenannt3.JPG, 71 KB

• ▶ Reply

Permalink Reply by Jason Yerian on September 27, 2010 at 2:21pm

You loading newer code, with older version of APM.

Your first 3 tabs should be "ArduPilotMega", then APM_config.h, then APM_Config_xplane.h
the 4th line down in the ArduPilotMega tab should read "ArduPilotMega Version 1.0.3 Public Alpha"

Like this...

Attachments:

• APMversion.jpg, 391 KB

• ▶ Reply

Permalink Reply by Jason Yerian on September 27, 2010 at 2:29pm

Your correct, you have to make your own APM_config.h file.

DeveloperPermalink Reply by Michael Smith on September 29, 2010 at 10:16am

Don't depend on that string. It's updated manually, but not on a regular basis.

• ▶ Reply

Permalink Reply by Jason Yerian on September 27, 2010 at 2:14pm

one of the library"s is not loading. Like mine saying..




AP_Math.h was not loading and #include had to be added.

Attachments:

• APMerror.jpg, 571 KB

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page