MinimOSD with 3DR telemetry and APM 2

Hello,

How can I connect my OSD with my telemetry at the same time.

 

There is not enough space as my APM1 to fold the pins.

 

Any help will apretiated

 

Kind Regards

C

Views: 212

▶ Reply to This

Replies to This Discussion

Permalink Reply by james sowell on July 13, 2012 at 10:41am

RSS

Social Networking

Top Content 

1 APM Project vs DJI NAZA and WOOKONG

APM Project vs DJI NAZA and WOOKONG
2 Flying 3D Spline Curves between Waypoints with ArduCopter 3.0

Flying 3D Spline Curves between Waypoints with ArduCopter 3.0
3 ArduCopter-3.0 ready for wider use

ArduCopter-3.0 ready for wider use
4 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
5 APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)

APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)
6 10k autonomous flight - telemetry guided flight, and other APM tests!

10k autonomous flight - telemetry guided flight, and other APM tests!
7 MAAT final version is being tested

MAAT final version is being tested
8 Getting ready for Arducopter 3.0

Getting ready for Arducopter 3.0
9 Help Tuning Arduplane 2.73 With A Large Slow Airframe

Help Tuning Arduplane 2.73 With A Large Slow Airframe
10 SolarSight, The University of Michigan SolarDrones UAV

SolarSight, The University of Michigan SolarDrones UAV

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service