Mission Planer - Waypoints Problem

Hello together, sorry for my Bad English

I have Problems with Mission witch have more then 5 Waypoints, before i start my Multicopter, ich creat the Route on the PC. After this i power the AP2.5 and send the Waypoints to the AP (Xbee), start the engine -> Stable -> Auto.

You can see that the AP fly the first 6 Waypoints correct, 

3691021564?profile=original

after the 7. it fixt the way to the 8.  but it never came to the 8. Waypoint after a time he will fix the 9.

3691021713?profile=original

I Stopt the Automode and switcht to the RTL Mode but the copter has crasht into the grassland.

In the Log i have more than 8 GPS Stelits, The Ap Version is 2.9.1b

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • It was the MAG thanks

  • T3
    Not sure the distance between your waypoints are, but they can't be to close or you'll have problems. There is also a radius around a waypoint and if that causes overlap you'll have problems.
  • MR60
    Do pu have logs? Could be a compass issue.
This reply was deleted.

Activity