Mission planner mode switch problem

Hy all

I have uploaded latest firmware to my helicopter on APM 2.0. When going through "mode setup" i can normally set modes and change between modes. But when going to FLIGHT DATA page and connect with helicopter, when i change between modes nothing changes... no indication on helicopter and no indication on HUD... Any idea?

thanks

0 members like this

▶ Reply to This

Replies to This Discussion

Permalink Reply by Stephen R Mann on September 30, 2012 at 8:02pm

Did you calibrate the radio?

▶ Reply

Permalink Reply by Joscht Laznyk on September 30, 2012 at 11:56pm

Yes... the values are OK, mode changes when going through mode setup, but when in live mode on HUD there is no change!

▶ Reply

Permalink Reply by Stephen R Mann on October 1, 2012 at 4:16am

Wish I could help, but that exhausts my experience level.

▶ Reply

DeveloperPermalink Reply by Michael Oborne on October 1, 2012 at 4:04pm

you do have the mode channle plugged in to ch5 ?

▶ Reply

Permalink Reply by Joscht Laznyk on October 8, 2012 at 11:10am

Yes..

▶ Reply

RSS

Welcome to
DIY Drones

Sign Up
or Sign In

Or sign in with:

Social Networking

Top Content

1	Mapping Mission Ride Along
2	APM 2.5 from hobbyking
3	Alt_hold and loiter acting crazy
4	Looking for best laptop screen to see in the sun
5	ArduPlane 2.73 released
6	Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)
7	3 axis Camera Gimble connections.
8	New micro-cameras emulate insects' compound eyes
9	APM Copter 2.9.1.b has been released
10	Thirty Days (#17): 12-rotor close up

RSS
View All

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here.