Replies to This Discussion

Permalink Reply by Richard on June 2, 2012 at 2:48am

Can you post some screenshots of your settings in APM and flightgear?

• ▶ Reply

DeveloperPermalink Reply by Michael Oborne on June 2, 2012 at 11:55pm

i know for my gains on the full size plane i use roll and pitch gains of about 4.
nav roll gain of about 1
throttle cruise at about 60 %

and airspeed cruse at 35 m/s

this makes the big planes respond fairly well.

• ▶ Reply

Permalink Reply by Mahesh M on June 6, 2012 at 8:20am

Thank you Richard, Michael

Problem Solved !!!

I noticed that in the long list of "Error Reading Data" on the FlightGear's terminal window there was a message of longer length occasionally scrolling by. I could read it after i took a screenshot to post online. The message read "generic protocol: binary mode input is not yet implemented".

I was using FlightGear version 1.9.1 which I use for SITL. I upgraded to FlightGear-2.0. Now FlightGear is able to read the data from APM Mission Planner correctly.

The setup also works with FlightGear-2.4 and FlightGear-2.6

Thanks for the help!

Mahesh M.

• ▶ Reply