Replies to This Discussion

Permalink Reply by CyberCrash on February 19, 2012 at 8:33am

Did you calibrate your ACC while having the copter standing still on the floor?

• ▶ Reply

Permalink Reply by LAIC on February 19, 2012 at 8:56am

did level calibration within APM Planner.

• ▶ Reply

Permalink Reply by Johann Van Niekerk on February 19, 2012 at 9:16am

Hi Laic

 

do you mean when you press forward its flying sideways or when you try and hover it just goes side ways ?

• ▶ Reply

Permalink Reply by LAIC on February 23, 2012 at 2:57am

sometimes when i yaw right it yaws left...

- but the problem is solved by aligning the motors straight.

thanks

• ▶ Reply

Permalink Reply by bergsprekken on February 19, 2012 at 9:56am

I had the same problem and did inflight leveling..hold throttle 20 seconds to the right just like arming, then fly and hold it stable then land.

• ▶ Reply

Permalink Reply by LAIC on February 23, 2012 at 2:58am

after aligning the motors i did inflight leveling. It flyes super stable now, but  loitering is a catastrophy.....

• ▶ Reply

Permalink Reply by LAIC on May 5, 2012 at 9:26pm

APM2 same problem :

got a carbon frame, motors are straight. Setings standard.

when yaw cw it torns cw o.k, but ccw nearly no reaction....

any help appreciated :-)

• ▶ Reply