DGPS RECEIVER AirStandard is designed specially for the high-precision flight of the UVAs. It is compatible with TI and T1-A to make the UVAs achieve the cm-level precise position. We're going to launch it at 2017 Cebit!

 

The internal board of DGPS RECEIVER AirStandard adopts GPS+BDS dual-system-five-frequency high dynamic calculating engine which supports the super long baseline E-RTK measurement. The frequencies received by the board include BDS B1/B2/B3 and GPS L1/L2. It supports GPS/BDS single system independent position and GPS+BDS joint system position, adapted to more severe and longer-distance position environment.

 

Main Parameter

Tracking Signal GPSL1C/AL1PL2P BDSB1IB2IB3I

First position time Cold start<50s Hot start<45s

Recapture Signal L1/B1 <1.5sfast<3sordinary

Position Precision

Single-point precision: 1.5m

Fixed solution precision: Horizontal 0.01m  Vertical 0.02m

Floating solution precision: 0.4m

 

RTK Performance

Initialization time <10sbaseline length <20km

Initialization credibility >99.99%

Data Rate 5Hz

 

Physical size and electrical characteristics

Voltage +5V±5%VDC

Power consumption 2.8w

Weight 95g

Size 112mm*52mm*17.5mm

Environmental indicators

Operating temperature -40 ~80

Storage temperature -55 ~95

 

Cebit: March 20-24, 2017

[url]http://www.cebit.de/en/[/url]

Deutsche Messe AG

MessegelAnde 1, Hannover, 30521

BoothH006 G54

Views: 83

Attachments:

Reply to This

Replies to This Discussion

Now it is GPS+GLOANASS+BDS trinal-system-five-frequency high dynamic calculating engine.

Reply to Discussion

RSS

Groups

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2017   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service