NEW READY TO FLY T380 ONLY $150

Xmas is coming don’t miss out on holiday deals NEW READY TO FLY T380  ONLY $150 SHIPPING NOT INCLUDED.

-T380 quad-copter is a mid-level aircraft designed mainly for FPV players.
-High efficiency: 8inch slow fly propellers and Disc brushless motors, the optimal efficiency is able to reach 9g/W.
-Stability: utilizes a high-performance MEMS sensor for 6DOF stabilization with low drift, shock resistance ability.
-Simple: a minimum 4remote control proportion channels are required to fly, Property core system, it is compatible to all RC equipments.
-Easy to operate： Can be installed in a few minutes.
-The T380 can take off and land vertically, altitude hold, hover, fly left and right, etc.
(http://api.ning.com:80/files/8wSHcHy6NQxR6Eebdz7adZTd8yngXTZz5NfUe*...)
－Aircraft size：410X410X140MM
－Maximun expandable size :615x615x140
－Motor to motor: Diagonal distance between two motor centers 410mm
－Propellers: frontal and versa professional props 8045 8inch
－Battery: LiPo 3S 2200mAh 20C
－Aircraft weight(kit only): Without battery, receiver, applicable payload
－Recommended payload: Camera mount ≤380gram
－Maximum payload: Use standard 1P battery≤380gram
－Flight distance: Visual area
－Flight time: 3S 2200mAh 1Pbattery, receiver  18~25mins
http://www.mymobilemms.com/OFFTHEGRIDSUN.COM/catalog/product_info.p... (http://www.mymobilemms.com/OFFTHEGRIDSUN.COM/catalog/product_info.p...)
I am still waiting for my phone drone ;(
http://youtu.be/rYe0csEIIsQ (http://youtu.be/rYe0csEIIsQ)
------------


To reply to this message, click here: http://diydrones.com/profiles/message/listInbox?xg_source=msg_mes_p...

--
To control which emails you receive on DIY Drones, go to:
http://diydrones.com/?xgo=RQj1BOqSKJ/g3CtkETC21rv6i6DAoDEig/XX6xR10...

Views: 6472

▶ Reply to This

Replies to This Discussion

Permalink Reply by Stuart Weener on October 30, 2011 at 5:21pm

Where is this shipping from . and what type of controller is in it, and is there a web site for this quad.

 

thanks SW

Permalink Reply by OG on October 31, 2011 at 6:22am

Hello,
This is a china product the company is called LotusRC the manufacture RC
goods for OEM & VAR. I am the North American distributer for Lotus RC. The
product  comes with no TX, RX, any standard TX RX will work. You can obtain
this on my web store but the promo is over yesterday current price $200 plus
shipping. Turn around time 3 weeks.  the electronics are not new from xaircraft
standard all in one ESC & controller non user reprogrammable.  An OEM has a
contract with Lotus so you will be seeing more of this product but not at
this low price.
http://www.mymobilemms.com/OFFTHEGRIDSUN.COM/catalog/product_info.p...


Here is the link to the OEM video :
http://www.engadget.com/2011/10/27/rotor-concept-hpq-1-quadcopter-e...

Permalink Reply by Stuart Weener on October 31, 2011 at 6:15pm

None of the links are working. but looks very interesting. How much is shipping. to the east coast.

Please send me a link to your web store that works. thanks.

Permalink Reply by OG on October 31, 2011 at 6:48pm
Permalink Reply by OG on November 19, 2011 at 9:26pm

Where you from?

Permalink Reply by Stuart Weener on October 31, 2011 at 6:34pm

I found the site, says that it is 50.00 for shipping. that is alot of money for shipping, where is it shipping from? also I was thinking of getting it at the 150.00 price, but for 200.00 plus 50 for shipping is alot of money for a propritary system, and what about tech support and spare parts?

Permalink Reply by OG on October 31, 2011 at 6:44pm

Parts are available but expensive ESC & Controler are about $150 USD, tech support is limited pay as you go 53$ shipping is to the US & Canada from factory in China.

Permalink Reply by Shirley on November 4, 2011 at 4:37am

which express company u use plz?

 

i'm also wondered whether ur ARF include electronice parts,etc could u give me more details?

 

thx a lot

Permalink Reply by OG on November 4, 2011 at 6:21am

This item is shipped by EMS from Shenzhen China 3 to 4 weeks turn aroud. This is full ready to fly quad copter no battery, RX, TX included. Main control board, ESC, motors, props, mounting plate & carbon arms are available separately. The cost of the individual parts are grater than the sum of the ready to fly quad. In some cases would be cheaper to punches a new one when you consider shipping cost.  $150 was only introductory price MSRP $200 for each unit. Purchase 10 or more I can do something with the price standard shipping for this item to the USA, Canada $52.
comes with :
1. manual

1. quad frame
1. ESC 4 in one
1. Flight control
1. Landing gear
1. canopy
4. props

Permalink Reply by OG on November 19, 2011 at 9:37pm

Permalink Reply by OG on November 19, 2011 at 9:30pm

EMS from china. bulk orders welcome

Permalink Reply by OG on November 19, 2011 at 9:35pm

This is not for you! what hapens when you crash?

RSS

Social Networking

Top Content 

1 Mapping Mission Ride Along

Mapping Mission Ride Along
2 APM 2.5 from hobbyking

APM 2.5 from hobbyking
3 Alt_hold and loiter acting crazy

Alt_hold and loiter acting crazy
4 Looking for best laptop screen to see in the sun

Looking for best laptop screen to see in the sun
5 ArduPlane 2.73 released

ArduPlane 2.73 released
6 Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)

Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)
7 3 axis Camera Gimble connections.

3 axis Camera Gimble connections.
8 New micro-cameras emulate insects' compound eyes

New micro-cameras emulate insects' compound eyes
9 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
10 Thirty Days (#17): 12-rotor close up

Thirty Days (#17): 12-rotor close up

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service