NMEA protocol
Hi..
Anyone can guide me how to convert the protocol (compressed binary) to NMEA
for MTK GPS3329 ?
because i want to use this GPS for other project which use NMEA
protocol.. is there any tools for easy configuration?
Replies to This Discussion
-
Permalink Reply by Bot Thoughts on -
Look at the MTK3229 datasheet/manual for the command to send to tell the GPS to send output in NMEA instead of Binary. This particular chip of yours may be the DIY Drones one and I don't know if it can output NMEA or not. I know that the Locosys MTK3229 boards do as well as any other "vanilla" MTK3229.
-
Permalink Reply by Bot Thoughts on
-
From the DIY Drones MTK3229 product page:
"Note that the new MediaTek has custom and exclusive "DIYDrones" firmware that allows the unit to output an efficient and very compressed binary protocol (This firmware will only work with our modules!). You can still change between NMEA and Binary protocol with standard MTK messages"
-
Permalink Reply by Jake Stew on -
From what I've read here the GPS outputs standard NMEA until the APM or MP sends the command to switch it to binary. So you shouldn't have to do anything since it will always transmit NMEA unless commanded to do otherwise.
-
Permalink Reply by Dzalwawlam on -
what you mean is, the GPS is transmitting NMEA in default? ok, i will try first
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
Documentation Editors
51 members
-
ArduCopter User Group
1276 members
-
ArduCopter (traditional …
179 members
-
South African DIY Drones…
57 members
-
ArduRover User Group
183 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
