Replies to This Discussion

DeveloperPermalink Reply by Michael Oborne on March 23, 2012 at 4:12pm

please try the latest planner

• ▶ Reply

Permalink Reply by Marc on March 24, 2012 at 12:40pm

Thank you michael all connecting ok on the latest mp.

 

many thanks

• ▶ Reply

Permalink Reply by Marc on March 23, 2012 at 4:14pm

hello,

this is happening to me as well, if i restore back to version 1.1.50 it works fine any version after that i cannot connect.

 

regards

 

• ▶ Reply

DeveloperPermalink Reply by Michael Oborne on March 23, 2012 at 4:21pm

Is this via usb?

what apm version

what firmware

if xbee what usb board are you using?

 

also try disabeling "reset apm on connect" in the planner options

• ▶ Reply

Permalink Reply by Earl on March 23, 2012 at 5:01pm

I am using APM2.0 purple board, MP 1.1.55, 2.4ghz Xbees in DM mode, one on APM2 in the router mode, the other 2 in end device mode at 38kb. One end device connected to loptop on com 4 in MP 1.1.55 at 38k and it works great ! The other Xbee in end device mode connected to my er9x TX displaying MavLink data at 38kb. Works great.

The only problem I was having was at the 57kb rate. Just can't get it to work. 38kb does work great.

Change serial3_BAUD in MP preferences to 38k and all other coms to 38kb and see if that fixes it.

Earl

• ▶ Reply

Permalink Reply by Anis Nielsen on March 23, 2012 at 8:19pm

Same here, I'm on xp , using APM1.4, via usb

no problems with 1.1.50 (had to get back to this version, tried first with 1.1.55,1.1.54,1.1.53,1.1.52 in that order) 

So this morning, i tried with 1.1.55, i could load/update apm with 2.5.0 anytime, but could not do anything else (like the setup, or editing Pid's ; Always time out .. always the ""no heart beat packet received")

.. my 2cts for what it can help , thanks Michael for the really good work anyways !

 

• ▶ Reply

3D RoboticsPermalink Reply by Chris Anderson on March 23, 2012 at 9:11pm

Please try again with 1.1.56, which is specifically updated to address the issue a small minority of users are having with DTR .

• ▶ Reply

Permalink Reply by Anis Nielsen on March 23, 2012 at 9:36pm

Thank you Chris

not really blocking but good to know the bug is spotted and aimed at and apparently solved; What could be the bug so specific to xp?

I'll report as soon as i can, but unfortunately not quite tomorrow, so hope someone else will confirm the bug is gone long before that :)

• ▶ Reply

Permalink Reply by Earl on March 23, 2012 at 10:23pm

no bug here on usb or 38kb xbee

btw I am running windows 8 consumer review !

Earl

• ▶ Reply

Permalink Reply by Alonso Rodriguez on June 8, 2012 at 8:50am

@Earl,

How were you able to install APM Planner to Windows 8?

When I try it tells me I need Framework 3.5.

 

• ▶ Reply

Permalink Reply by Romp on March 25, 2012 at 9:43am

I've updated to latest firmware (with MP) and this version of mission planner and am still having this issue

• ▶ Reply

DeveloperPermalink Reply by Michael Oborne on March 25, 2012 at 2:47pm

try enableing or disableing the reset apm on connect in configuration > planner

• ▶ Reply

• ‹ Previous
• 1
• 2
• 3
• 4
• 5
• Next ›
• Page