No Mavlink, but console works.
I have a ArduPilot Mega 1 (red, with oilpan "shield") that after the latest firmware update (Arducopter 2.6) doesn't seem to communicate via Mavlink anymore.
Symptoms so far:
- Firmware upload works.
- Console mode in MP works fine. Passes all tests.
- Other modes than Console in MP does not work over USB.
- Nothing works over xbee.
- MinimOSD says waiting for mavlink data.
- It still fly's !
- EEPROM reset and factory reset using Console doesn't help.
- ArduPlane 2.4 has the same symptoms.
- Current version or older version of MP has the same behavior.
I have to admit, the last flight before the firmware upgrade was a heavy crash, so pretty much my question is if this makes sense for a hardware issue (firmware upload possible but no mavlink ??) or is has this to be software ?
Tags: arducopter, crash, firmware, mavlink, no
Replies to This Discussion
-
Permalink Reply by Michael Pursifull on -
Did you switch to Mission Planner w/ MAVLink 1.0? Or are you still using 0.9? Look in the title bar of Mission Planner.
-
Permalink Reply by gzebedin on -
hello!
HOW do you change the mavlink protocol in the Mission Planner? I cant find a switch or a download for Mavlink 1.0!
HELP
Thanks
-
Permalink Reply by Michael Pursifull on
-
Run C:\Program Files(x86)\APM Planner\ArdupilotMegaPlannner10.exe
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
ArduCopter Italian Group
87 members
-
ArduCopter User Group
1280 members
-
Team Prometheus
7 members
-
ArduCopter (traditional …
179 members
-
Model making for FlightG…
16 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
