problem connecting to APM

Hey!

I have a big problem....with the CLI switch in flight mode, APM no longer connects to my PC. No status led-s blink! And when i tried to coneect i flight mode i get this message:

at ArdupilotMega.MAVLink.Open(Boolean getparams)
at ArdupilotMega.MainV2.MenuConnect_Click(Object sender, EventArgse)

I tried to erase the EEPROM but i couldn connect in CLI mode!!

Please help me!!

Thanks!

0 members like this

▶ Reply to This

Replies to This Discussion

Permalink Reply by 3D Robotics Tech Support on January 30, 2012 at 12:53pm

Hi Peter,

Which firmware are you using?

This could be a hardware problem; does the CLI switch look well soldered onto the board? Does the board reset when you hit the switch?

▶ Reply

RSS

Welcome to
DIY Drones

Sign Up
or Sign In

Or sign in with:

Social Networking

Top Content

1	Mapping Mission Ride Along
2	ArduPlane 2.73 released
3	APM 2.5 from hobbyking
4	Alt_hold and loiter acting crazy
5	ArduVTOL - Wingcopter - Flight Report Nr.1
6	Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)
7	3 axis Camera Gimble connections.
8	Looking for best laptop screen to see in the sun
9	New micro-cameras emulate insects' compound eyes
10	APM Copter 2.9.1.b has been released

RSS
View All

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here.