Replies to This Discussion

Permalink Reply by Sebastian Gralla on May 6, 2011 at 7:27am

did you calibrate your accelerometers?

• ▶ Reply

Permalink Reply by Bart on May 6, 2011 at 8:58am

come again? wat are they and how do i do that?

• ▶ Reply

Permalink Reply by Sebastian Gralla on May 6, 2011 at 9:33am

please read the wiki BEFORE flying:

http://code.google.com/p/ardupirates/wiki/Configurator

• ▶ Reply

Permalink Reply by Bart on May 6, 2011 at 12:19pm

ah, yes i did this.

any solutions left?

• ▶ Reply

Permalink Reply by roger on May 6, 2011 at 9:24am

Bart,

 

I have bias toward using the CLI (refer to wiki on how to go into cli mode) ... once in CLI, choose the menu that calibrate the minimum throttle level of transmitter ... might fix your problem ... by the way one of the menu also in CLI allows you to calibrate your accels ... good luck.

• ▶ Reply

Permalink Reply by chris g on May 7, 2011 at 7:03pm

what leds are lit on the oilpan after it initializes

• ▶ Reply

ModeratorPermalink Reply by John Church on May 7, 2011 at 7:34pm

http://code.google.com/p/arducopter/wiki/AC2_LEDs

• ▶ Reply

Permalink Reply by chris g on May 8, 2011 at 12:01am

i meant that question for bart, who is having the problem. sorry for being unclear

• ▶ Reply