Problem with some settings in MP 1.2.6

Hi,

I am using MP 1.2.6 in Win7 and APM 1.4 (DIP-Switches disabled by reversed elevator and yaw setting) and I think some settings don't work as they should.

For example in 'Configuration'-->'Standard Params' --> Rudder Mix (KFF_RDDRMIX):  I can only set 0 or 1, but I can set i.e. 0.8 in 'Parameter List'. Similar with 'Configuration'-->'Advanced Params'-->'GPS to Baro Mix(Alt_Mix)' and 'Configuration'-->'Pitch Compensation(KFF_PTCHCOMP)'.

In 'Configuration'-->'Advanced Params'-->Airspeed use(ARSPD_USE)' the list shows 'Use', while at the same time 'Configuration'-->'Parameter List' shows '0' instead of '1'. Changing it delivers always reversed results.

Does anybody duplicate this or is this an individual problem ?

 

 

 

Views: 112

▶ Reply to This

Replies to This Discussion


DeveloperPermalink Reply by Michael Oborne on August 17, 2012 at 6:53pm

i have fixed the Andvanced param tab to do the correct option. it will fix itself on the next update

Permalink Reply by Ultrafuge on August 17, 2012 at 11:57pm

Thank You very much for all the work !!!

Permalink Reply by Ultrafuge on August 19, 2012 at 3:42am

Hi Michael,

 

thank you for fixing ARSP_USE in MP 1.2.7 !

The other parameters (like KFF_RDDRMIX, Alt_Mix, KFF_PTCHCOMP) still accept only 0 and 1 on my system (Win7 german version), therefore I am just curious if you will change that in the future to percentage like in THR_MIN or if I have an individual problem (Win7 german version loaded for example 5 instead of 0,5 for KFF_RDDRMIX from the original 2.5 setup).

 


DeveloperPermalink Reply by Michael Oborne on August 26, 2012 at 6:12am

on english windows, KFF_RDDRMIX, Alt_Mix, KFF_PTCHCOMP all work correctly. so i might need to look further into it.

 

i think i may have found the issue. should be fixed in enxt version

RSS

Social Networking

Top Content 

1 APM Project vs DJI NAZA and WOOKONG

APM Project vs DJI NAZA and WOOKONG
2 ArduCopter-3.0 ready for wider use

ArduCopter-3.0 ready for wider use
3 Flying 3D Spline Curves between Waypoints with ArduCopter 3.0

Flying 3D Spline Curves between Waypoints with ArduCopter 3.0
4 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
5 APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)

APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)
6 10k autonomous flight - telemetry guided flight, and other APM tests!

10k autonomous flight - telemetry guided flight, and other APM tests!
7 MAAT final version is being tested

MAAT final version is being tested
8 Getting ready for Arducopter 3.0

Getting ready for Arducopter 3.0
9 Help Tuning Arduplane 2.73 With A Large Slow Airframe

Help Tuning Arduplane 2.73 With A Large Slow Airframe
10 SolarSight, The University of Michigan SolarDrones UAV

SolarSight, The University of Michigan SolarDrones UAV

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service