Replies to This Discussion

Permalink Reply by Dave Skala on February 16, 2012 at 2:00pm

Ok everyone, the boys and I decided to keep the newest designs pictured previously. We anticipate making them in quantity when the sky's are open. That being said, we've decided to only sell the designs we created first, see them below.

C2 UAS Pusher - FOR SALE

FEATURES: This aircraft has stable flight character and exceptional slow speed manors.  Its’ construction is Cad/laser-cut light ply, foam lined glassed foam core/glass wings.  The payload capacity has been estimated to be 20 - 25 lbs. The fuselage features plenty of stowage area.  The included wiring harnesses utilize multi-pin connectors.  Capable of 35’ take-offs and short slow landings.  The stall speed is only about 15 - 18 MPH (lightly loaded) top speed estimated at around 100 MPH with 50cc 2C.  Wing spans are 9.5’ and length is 6.5’.  All up weight is typically 20 – 25 lbs. depending on set-up.  We tested mostly with an 50cc 4 stroke and 2 stroke single motors but should fly well with a 20cc motor and will likely handle motors up to 60cc.  Assembly is very simple and quick with a tool-less nose for payload access.  Cad files and additional data may be available under certain arrangements.  The original cost to make the airframe was about $4,500. The aircraft is painted primer gray and the tail is now set up like the pic below this one.

 

Notes C2: As pictured, but does not include motor, A/P, cameras, landing gear, wiring or servo’s.                                                Asking $300  (customer arranges shipping).

 

ZDZ 50cc 2C spark ign. motor set up as pusher and ideal for this plane.

                                    Asking $200

Notes A3-1: As pictured below, but does not include motor, A/P, cameras, main wheels (front is included) or servo’s.                                        

Asking $750 (customer arranges shipping).

 

Notes A3-2: Similar as pictured, but does not include motor, A/P, cameras, landing gear, 2” AL wing spar or servo’s.  Span 11.5’ (not 12’) and different airfoil.                     

Asking $550 (customer arranges shipping).

 

Notes A3-3: Design as pictured, fully constructed/wired, but uncovered frame that has never flown, wings are foam core (rough finished, but not yet glassed) does not include motor, A/P, cameras, landing gear, 2” AL wing spar or servo’s.  Span 16’ or as cut down per finisher (not 12’)

Asking $350 (customer arranges shipping).

 

We also have a 12’ Telemaster that is Black. VERY STABLE

Notes: Ready to fly with Moki 4stroke 50cc. 3.5HP, Radio is a Futaba FM, Servos etc.

Asking $800 (customer arranges shipping).

 

Also have an Edge 540 with EZZ Super 80 motor. READY TO FLY

ASKING $1,200  (customer arranges shipping).

PLEASE EMAIL ME DIRECT AT:

UAVDAVE@YAHOO.COM

• ▶ Reply

Permalink Reply by Richard Unwin on February 20, 2012 at 4:47am

I cant get your web page to show, where in the us are you, i am interested in the C2

Richie

• ▶ Reply

Permalink Reply by John M. Smith on August 24, 2012 at 9:10pm

Hi Dave,

Did all of these sell already? If not which ones are left and current asking prices?

John Smith

• ▶ Reply

Permalink Reply by angel on November 3, 2012 at 6:10am

Hi Guys this is Angel and I would like to let you guys know there is a Place to sell UAV Dones as well as parts and services related to UAV DRONES. UAV Drones For Sale

I looked over the website and I liked the navigation and the wide range of listings available to post to.

I looked at a few ads and they DO allow direct linking to your website/webpage. You can also link to your Youtube Videos.

As far as I know it is Free to Post your ads.

Enjoy ; )

Angel

• ▶ Reply

Permalink Reply by Jacob Densmore on Sunday

Angel

Please stop spamming.

I see you posted this allover the website, I think once is enough.

Thanks

"Hi Guys this is Angel and I would like to let you guys know......"

• ▶ Reply

AdminPermalink Reply by Thomas J Coyle III on Sunday

@Jacob,

If you take a look at anel's last post in this discussion, it is dated 11/3/2012 which is about 7 months ago. Angel has not posted to this Forum since 11/3/2012 and is probably long gone. I will keep an eye open for angle's return should that occur in the future.

Regards,

TCIII Admin

• ▶ Reply

Permalink Reply by Jacob Densmore on Sunday

Ok I hope i did not offend anyone.

Keep up the good work.

DIYdrones.com is my new favorite site

thanks.

• ▶ Reply