Replies to This Discussion

Permalink Reply by Wesley Chuen on April 22, 2012 at 11:12am

Mine are constantly flickering.

• ▶ Reply

Permalink Reply by Rick Stewart on April 22, 2012 at 12:48pm

Yes, this is normal.  Mine do the exact same thing.

Rick

• ▶ Reply

DeveloperPermalink Reply by John Arne Birkeland on April 22, 2012 at 1:43pm

Using the APM2 RX and TX lights as status indicators for the PPM Encoder is new in the ArduPPM 2.2.66 firmware.

<RX><OFF> no pwm input detected
<RX><TOGGLE> speed of toggle indicate how many channel are active
<RX><ON> input lost (failsafe)

<TX><OFF> ppm output not started
<TX><FAST TOGGLE> normal PWM->PPM output or PPM passtrough failsafe
<TX><SLOW TOGGLE> PPM passtrough

• ▶ Reply

ModeratorPermalink Reply by Dean Wynton on April 22, 2012 at 11:45pm

Thanks everyone..

• ▶ Reply