Hey guys,
I'm selling a kit I've put together. The kit comes fully assembled and tested.
Here's the list of what's included:

  • 1 x Multiplex TwinStar II Electric Kit
  • 1 x ESC C-35 Mini Brushed w/BEC
  • 2 x Servo HS-225BB2 x Servo HS-82MG
  • 1 x ArduPilot Mega  w/ ATMega1280
  • 1 x ArduPilotMega IMU Shield/OilPan
  • 1 x HMC5843 - Triple Axis Magnetometer
  • 1 x Kit MPXV7002DP
  • 1 x uBlox Adapter Cable 15 cm
  • 1 x GS407 U-Blox5 GPS 4Hz
  • 1 x uBlox Adapter Servo
  • 1 x Servo Extension Cable
  • 1 x Servo Y Extension
  • 2 x XBee-PRO 900 w/ RPSMA connector
  • 2 x Antenna 900MHz 3dBi
  • 1 x XBee Explorer USB
  • 1 x XtreamBee Board
  • 1 x DX6i Transmitter w/ Receiver
  • 2 x Li-Po 7.4 V 25C 4800 mAh


I'm asking 1500$ for the whole kit, but I'm ready to sell some groups of parts by themselves. I can send a more detailed price list upon request.


Views: 769

Attachments:

Reply to This

Replies to This Discussion

I'm interested in the whole set minus the transmitter. Asking price? Any crashes and has this config been flown before?

the setup has been flown a couple of time for testing and ensuring everything was working perfectly. The APM will be programmed with the latest version of the code. Last time I had to do a couple of tweaks to the code (for the airspeed and for the logging configuration). Those will be documented.

Everything is currently mounted semi-permanently in the airplane (it was meant to stay there, but everything would be easy to remove). The left and right wings are not glued together (was easier to transport and ship), but the elevator and rudder are glued. There's custom access door on the bottom for mounting the receiver.

There has been no crash.

I'm asking 1000$ for everything minus the transmitter. 

The only assembly required will be mounting your receiver, join both wings (glue them if you want) and screw them to the frame. And you'll need is a laptop for the groung station, your transmitter/receiver and a li-po charger.

 

If interested to buy, PM me information such as paypal email address and shipping address. I should be able to shipp free to most of US and Canada, but I need shipping info, I'll confirm that.

Salut Jean-Philippe, je serais interesse d'acheter:

  • 1 x ArduPilot Mega  w/ ATMega1280
  • 1 x ArduPilotMega IMU Shield/OilPan
  • 1 x HMC5843 - Triple Axis Magnetometer

Je suis a Montreal, le shipping ne devrait pas etre trop cher.

 

Merci

I'm interested. Let me know if its still for sale...

Hello,

Is the UAV still for sale ?

Hi,

Yes it is still for sale.

I already sold the Spektrum DX6i radio Tx/RX, but if you need a radio, we can probably arrange something.

 

Yes it is still available.

I can still buy it complete with all... it is still for sale.

is possible to ship in Italy.

and What range can reach the video? 

Hi, Is this still available? Can you ship to the Netherlands? e-mail:a.spiracopoulos@mac.com

RSS

Social Networking

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service