Replies to This Discussion

Permalink Reply by Curt Olson on July 17, 2009 at 5:24am

Hi Ludwig,

There is a step in the manual that describes how to copy the easystar.h file into the arduino folder. It appears that you may have missed this step and the result is the code compile (required before uploading) has failed.

Regards,

Curt.

• ▶ Reply

Permalink Reply by Ludwig Färber on July 17, 2009 at 6:03am

thank you

• ▶ Reply

Permalink Reply by Ludwig Färber on July 17, 2009 at 9:01am

Hello

I think that's where it stands me how to do that

can you explain to me

thanks for all

ludwig

• ▶ Reply

Permalink Reply by Danilo Marques Figueiredo on July 19, 2009 at 7:39am

Hi Ludwig!!!

I have this problem too!!!! I think the problem is on the driver see this tutorials:

http://www.vistax64.com/tutorials/193584-device-manager-install-dri...

http://www.ladyada.net/make/boarduino/use.html

Regards.

• ▶ Reply

Permalink Reply by comrau on July 22, 2009 at 8:49pm

Hi all, I am a new member of forum


[url=http://simulationpretpersonnel.com][color=#FFFFFF][u]pret personnel en ligne[/u][/color][/url][color=#FFFFFF] - Pret personnel en ligne et de comparer les meilleurs taux afin de... La demande de prêt personnel en ligne[/color]

• ▶ Reply