First of all some background...
Having spent a good 2 years playing about with an Skywalker, Ursus and a Canon camera running CHDK, and designing my own uav, which actually flew recently ,I have come to the conclusion that flying wings may just be the best type of platform for short range aerial mapping tasks to create DEM, DSM models for GIS purposes.
The Skywalker was okay (but quite fragile, and now in pieces!), but I think it is too small to fit a roll gimbal on it. And I've found that if pictures are taken on a slight angle, it is very difficult to use software to tile them up nicely. this is my best effort, but far from perfect. The roads on the right do not line up as the camera must have been on a 45 degree angle when the picture was taken. (click for larger resolution) - It was taken using an ixus80 attached to an URSUS Airframe
Realizing that I need to use an airframe that can accommodate a stabilized roll gimbal, i started to design and build my own twin boom design. It took 6 months from initial design, to first test flight. It has a wingspan of 2.4m - AUW of 5kg, and a flight duration of around 30 minutes with 2 x 5000mah packs. However it needs a heck of a lot of room to take off and land, something i don't have in the areas i need to take photos.
Picture of twin boom plane...
What are peoples experiences with using flying wings for this reason? I have the following types of flying wings, and wondering which one is the best to begin with?
I have been using the 60" wing to test the APM2 and 3dr radios. And was using the URSUS (now in pieces after a nasty crash!) as a test platform to practice with the Canon CHDK Kit.
Here's a few pictures of the wing and camera....(click images for larger version.)
My question is how straight forward do you think it is to fit a roll stabilized gimbal to any of the above airframes?
Hello everyone. I'll tell you my experience with fixed wings.
As indicated by another user, I started with a simulator, in my case I used two, aerosimrc and aeroflyrc, using the model in which you are interested, in my case flying wings.
In a second phase, when I had some expertise with the simulator (taking off, and landing, etc.), I bought this flying wing model
resistant, very simple and inexpensive, in RTF configuration.
Finally, the last phase in which I am, I will buy the largest model, in which I will install the autopilot.
2. Small flying wing, resistant
3. Last, big flying wing on which mount the electronic
It has been a while. I hope everything is going well with you.
Are you no longer working with the X8? We are still using the X8 with good success. Take a look at our website for examples of all the work we have completed with the X8. The site is www.jrcanmap.com. Lots of samples of various projects we have completed.
What exactly do you mean by tip stall? The only stalling issues we have had with the X8 is upon launch where it sometimes rolls to the left and does a nose dive. I expect it always rolls to the left due to the centrifugal force of the prop. If you launch it quickly however the elevons get enough wind speed to counter the roll.
I look forward to hearing from you again and your progress on creating a mapping platform.
Wow! Those times are awesome. Can you share all the specs? What motor and batteries are you using? Thank you.
I'm using one of Brendan's builds (though not the wing). 1 hour and 11 minutes on its second flight, and that was flying poorly tuned and and landing with 3.7v per cell. I honestly think that I wouldn't have made as much progress as I have on this project if it wasn't for him.
HI, thats very impressive. What camera are you carrying on this bird and at what altitude do you fly?
Seams that I have to swallow my words there regarding the X5 and give mine another try.
Any interest in a crowd-designed flying wing?
I gave had an idea about designing a flying wing with a swappable payload module. I can do the aerodynamic design and even build some prototypes, but working out all of the aspects of the mechanical design would be too much work for me alone.
The main features would be following:
I can post some drawings later if there is any interest.
do you have a video to share which has a aerial mapping done?