V1.0.62

Had a bit of a weird one, updated from 1.0.58 to 1.0.62

Updated the software in my heli to 1.0.39b. Connected and the new mission planner is really slow. the map never updates and the HUD appears after a few secs but the rest of the screen never shows. gauges etc

 

Went back to 1.0.58 and everything works fine.

Suppose it might be my graphics card i'm using my old laptop.

Views: 371

▶ Reply to This

Replies to This Discussion

Permalink Reply by malcolm churn on September 4, 2011 at 12:22pm

what make laptop is it, hooper?

Permalink Reply by Whooper on September 4, 2011 at 4:55pm

It's an advent computer 7014. I'll continue to search for drivers and let you know. thanks


DeveloperPermalink Reply by Michael Oborne on September 4, 2011 at 4:14pm

Hooper, that card support opengl 1.5, so should work fine with correct drivers.
http://feedback.wildfiregames.com/report/opengl/device/GeForce4%204...

 

Michael


DeveloperPermalink Reply by Michael Oborne on September 4, 2011 at 4:55pm
Permalink Reply by Whooper on September 4, 2011 at 5:08pm

Thanks, so if I understand your first link correctly, if I can update and confirm via dxdiag the driver version is at least 6.14.10.7230 then it should work?


DeveloperPermalink Reply by Michael Oborne on September 4, 2011 at 5:13pm

technicly yes. however, anything new should work

Permalink Reply by Hooper on September 5, 2011 at 3:46am

unfortunately the download came up with "nvidia cannot locate any drivers compatible with your current hardware". I also checked the driver version (6.14.0010.7737) which should be more recent than the driver in the link above. Can you recommend any other tweaks or tests to try?

many thanks

Permalink Reply by Julie Macfarlane on September 5, 2011 at 5:16am

I found my driver there for a Gforce 6800 for Win7. Installed and the system works perfectly.

 

I like the new setup system, calibration of the radio etc. Though on setting modes, didnt see any change after clicking the SAVE button.

 

The CMD screen is still alive in the background

Good Job!

Permalink Reply by Hooper on September 7, 2011 at 6:15am

rolled back to the original drivers dated 2002 and working correctly now.


DeveloperPermalink Reply by Michael Oborne on September 7, 2011 at 6:25am

good to hear

RSS

Social Networking

Top Content 

1 Mapping Mission Ride Along

Mapping Mission Ride Along
2 Alt_hold and loiter acting crazy

Alt_hold and loiter acting crazy
3 APM 2.5 from hobbyking

APM 2.5 from hobbyking
4 ArduPlane 2.73 released

ArduPlane 2.73 released
5 ArduVTOL - Wingcopter - Flight Report Nr.1

ArduVTOL - Wingcopter - Flight Report Nr.1
6 Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)

Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)
7 3 axis Camera Gimble connections.

3 axis Camera Gimble connections.
8 Looking for best laptop screen to see in the sun

Looking for best laptop screen to see in the sun
9 New micro-cameras emulate insects' compound eyes

New micro-cameras emulate insects' compound eyes
10 Thirty Days (#13): Y6 in-flight motor failure tests

Thirty Days (#13): Y6 in-flight motor failure tests

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service