Waypoint Behaviour
Had 10 flights yesterday but no luck getting to WP's the model seems to be looking for the WP's.. but just gets further and further away. My question is. When a model arrives at the last WP, should it hold that position. Also when it arrives at the RTL position does it hold that position or does it see the mission is over and does it's own thing. Any thoughts please.
Paul
Paul
Replies to This Discussion
-
Permalink Reply by David Low on -
In my case, after the plane completed the last waypoint, it will goes to waypoint 0 (suppose to be the home position, but it just goes somewhere else). And after circling waypoing 0 for a while, the plane just repeat the route again (goes to waypoint 1,2,3....)
-
Permalink Reply by Paul Har on -
Another trial today, I have noticed that my rudder has a lot of throw to the left when the a/pilot calls for it, but has very little throw when called to turn right.
Any suggestions please.
-
3D RoboticsPermalink Reply by Chris Anderson on -
I'd increase your heading gains. I'd start with line 4.2.
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
UK Ardupilot Group
110 members
-
Swiss Drone Group
9 members
-
Andropilot Users Group
182 members
-
ArduCopter User Group
1289 members
-
ArduCopter Evolution Team
140 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
