What size are the bullet connectors on the standard AC motors and ESCs?

I just received my order of motors and ESCs from jDrones, but unlike the motors and ESCs I had previously ordered from DiyDrones, the bullet connectors where not already soldered on.

The problem is that a couple connectors were missing, so I'm just going to find some at the hobby store, except I'm at work and I don't have a connector with me, so I need to know whether the connector is a 3.5mm or 4mm bullet connector.

0 members like this

▶ Reply to This

Replies to This Discussion

JDronesPermalink Reply by Jani Hirvinen on July 27, 2011 at 7:45pm

Just don't use those bullets, much safer. Earlier there were problems with some of the connectors so we removed them as pre-soldered.

▶ Reply

Permalink Reply by sam d on July 27, 2011 at 7:52pm

I double Jani. I had problems with two of my motors due to bad bullet connectors. Ended up soldering the esc directly to the motors.
sam

▶ Reply

RSS

Welcome to
DIY Drones

Sign Up
or Sign In

Or sign in with:

Social Networking

Top Content

1	Mapping Mission Ride Along
2	ArduPlane 2.73 released
3	Alt_hold and loiter acting crazy
4	ArduVTOL - Wingcopter - Flight Report Nr.1
5	APM 2.5 from hobbyking
6	Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)
7	3 axis Camera Gimble connections.
8	DroidPlanner for Android The best missionplanner alternative! Using Mavlink via cheap usb adapter (Follow me - PIDS - ACC calibration - FREE)
9	Looking for best laptop screen to see in the sun
10	New micro-cameras emulate insects' compound eyes

RSS
View All

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here.