Where can I find a MQ-1 Predator Rotax 914F engine or surplus parts?

I have a friend who wants to build a light weight plane and wants to find predator engines or surplus parts for the engines. Does anyone know where I can look for them, and how much they might be?

Views: 409

▶ Reply to This

Replies to This Discussion


ModeratorPermalink Reply by Sgt Ric on April 7, 2009 at 6:27pm
A little above the DIY $ range I would hazard to guess.
Permalink Reply by scotty baird on April 15, 2009 at 7:04pm
i think you are at the wrong forum. that is a 100 hourse engine. the engine will run between14000 and 20000 usd.
Permalink Reply by george on July 7, 2009 at 7:55pm
You'd be surprised what a diy'er can spend on a UAV.
Permalink Reply by Ryan on July 6, 2009 at 9:57pm
Try aerotrader.com, etc...
Permalink Reply by Ryan on July 6, 2009 at 9:58pm
I even saw one on ebay.com one time.
It doesn't have to be from the Predator unless you really want the turbocharger.
Permalink Reply by george on July 7, 2009 at 7:54pm
I thought the predator engine was 1000hp. Can we confirm this?
Permalink Reply by Ryan on July 7, 2009 at 9:13pm
Uh no...not the Rotax Predator - the Reaper with turboprop maybe!
Permalink Reply by Longshot7601 on July 7, 2009 at 11:47pm
Per the Predator and Reaper Wikis: Predator - 115 HP, Reaper - 950 Shaft HP.


Here is a Rotax for sale. Ouch!
http://www.ultralightnews.ca/rotaxengineprices/6.html

RSS

Social Networking

Top Content 

1 APM Project vs DJI NAZA and WOOKONG

APM Project vs DJI NAZA and WOOKONG
2 APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)

APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)
3 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
4 Flying 3D Spline Curves between Waypoints with ArduCopter 3.0

Flying 3D Spline Curves between Waypoints with ArduCopter 3.0
5 10k autonomous flight - telemetry guided flight, and other APM tests!

10k autonomous flight - telemetry guided flight, and other APM tests!
6 Drone shot down by police

Drone shot down by police
7 ArduCopter-3.0 ready for wider use

ArduCopter-3.0 ready for wider use
8 MAAT final version is being tested

MAAT final version is being tested
9 Help Tuning Arduplane 2.73 With A Large Slow Airframe

Help Tuning Arduplane 2.73 With A Large Slow Airframe
10 Thirty Days (#28): McMaster-116 lift

Thirty Days (#28): McMaster-116 lift

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service