Replies to This Discussion

3D RoboticsPermalink Reply by Chris Anderson on June 17, 2011 at 6:14am

Yes, the telemetry kit will work fine. Either one of the GPSs will also work.

You realize, of course, that ArduIMU is not an autopilot by itself. Your application just needs attitude and location data?

• ▶ Reply

Permalink Reply by Jakub on June 17, 2011 at 7:01am

Yes I know. I do not want autopilot. I would like to have only telemetry with gps and pitch, roll, speed,etc.

Perfect. And why people recommend this: http://www.adafruit.com/products/126

Are you sure that the telemetry kit will work fine with this device? http://store.diydrones.com/ArduIMU_V2_Flat_p/kt-arduimu-20.htm

• ▶ Reply

Permalink Reply by Jakub on June 18, 2011 at 2:58am

I do not know if you understood me. I asked you what is difference between adafruit and XtreamBee Board.

this: http://www.adafruit.com/products/126

and

this: http://store.diydrones.com/productdetails_popup.asp?productcode=BR-...

Because many people recommend adafruit board with ArduIMU + V2 and you said to me that telemetry kit with XtreamBee Board will work fine.

thank you

• ▶ Reply

Permalink Reply by Russell B. Sutton on June 18, 2011 at 3:04am

You can't go wrong with the stuff from DIY-Drones Store. 

• ▶ Reply

Permalink Reply by Jakub on June 18, 2011 at 9:11am

Ok, thank you very much for informations.I have a second question:
for complete attitude (pitch, roll, speed etc) is ArduIMU + V2 with GPS enough? Or do I need buy gyros and accelerometers? I am a little bit confused now. Here is a video where is ArduIMU with sensors. http://www.youtube.com/watch?v=C8b3UZmC1Zs

 

But here http://store.diydrones.com/ArduIMU_V2_Flat_p/kt-arduimu-20.htm is written:

features: 

- 3 Axis Accelerometer

- 3 Axis Gyroscope and Accelerometer

Can you explain me it?Thank you very much

• ▶ Reply

3D RoboticsPermalink Reply by Chris Anderson on June 18, 2011 at 9:38am

Jakub: that is an old video of the original ArduIMU (v1). ArduIMU V2 has all of the sensors on one board.

• ▶ Reply

Permalink Reply by Jakub on June 18, 2011 at 1:05pm

Great information. Thank you once again.

 

Jakub

• ▶ Reply