Wireless Video problems
It has been for ever since I last came on this site but finally I have purchased myself a quadcopter and wireless FPV system. My video set up is a 900mhz Range Video RX and TX with a KX191 colour camera. Now my problem is the reception, I have done tests up and down the road and even within a few meters of the RX and the video image flickers and carries on and the range is not very impressive. I am running the TX at 11.1v from a 3s lipo and the RX is running from a 12vdc supply of 1amp. Could someone please help me get a crisp image?? I dont know what is wrong here but I am not please by this new system, I would have atleast expected the image to be stable and clear within 10m. Thanks
Tags: Camera, Image, Problems, Range, Reception, Video, Wireless, problems, transmission, video
Replies to This Discussion
-
Permalink Reply by Philthyy on -
What antennas are you using? What are you viewing the video with? Are you powering the Vtx with it's own battery or are there other circuits drawing from the same circuit?
-
ModeratorPermalink Reply by Zach Bayne on -
Im a fan of the V antenna with low pass filter. Range video sells both of those. I get a pretty good reception at distance. Im planning on getting a patch antenna on the ground side too.
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
Andropilot Users Group
182 members
-
Moderators
24 members
-
ArduCopter User Group
1278 members
-
Documentation Editors
51 members
-
ArduCopter (traditional …
179 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
