Yet another twin boom
Inspired by others I have constructed a 4 foot wingspan design for my first drone.
Design turned out quite heavy and the short nose is pushing the cofg well back so will need to add some mass up front.
![]()
![]()
Design turned out quite heavy and the short nose is pushing the cofg well back so will need to add some mass up front.
- Attachments:
-
-
IMG_0016.jpg, 762 KB
-
Replies to This Discussion
-
Permalink Reply by Ron Jacobs on
-
Looks good. Maybe once you get all the electronics in, the Cg will move forward? What is the weight?
Are those helicopter booms?
-
Permalink Reply by Andy Joyce on -
No, found the carbon spars in my local hobby shop. 12x6mm so was able to match up with the 6mm Depron I used for the tail. which is made up from a 3mm skin top and bottom with a 6mm core with cuts outs.
Servo wires run in each boom
Just started a new fuselage which is several inches longer.
-
Permalink Reply by Andy Joyce on
-
Fuselage Mk2
- Attachments:
-
-
IMG_0018.jpg, 600 KB
-
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
ArduCopter User Group
1355 members
-
ArduRover User Group
207 members
-
Moderators
24 members
-
Documentation Editors
52 members
-
ArduPlane User Group
719 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
