Replies to This Discussion

Permalink Reply by Richard on January 5, 2013 at 4:59am

Terry - I don;t personally own a 2.5 board, but i believe it is very similar to the APM2 board - In the manual, on this page, the 3rd image down shows the APM pins, and what they do, Airspeed is in the corner...

Permalink Reply by Richard on January 5, 2013 at 5:00am

Permalink Reply by Terry McKinley on January 5, 2013 at 12:22pm

Thanks thats what I thought but somehow could not find this pic

Cheers

DeveloperPermalink Reply by Kevin Hester on January 5, 2013 at 9:13am

They are already there on the 2.5, just plug into the A0 position.  

My airspeed sensor came missing the 3 pin header, so I did have to solder on a .1" spacing 3 pin header. No biggie.

Permalink Reply by Terry McKinley on January 5, 2013 at 12:23pm

Cheers info now complete