Replies to This Discussion

DeveloperPermalink Reply by Randy on January 30, 2012 at 7:21pm

you're using a 2560 board and you're loading the code from the mission planner?

 

when you say, the sensors you mean accelerometer and gyro?  I guess you're looking in the mission planner's flight data screen and the artificial horizon isn't moving?

Permalink Reply by valentin colon on January 31, 2012 at 4:20am

exactly......randy, I´m using 2560  loading from mission planner and artificial horizon isn´t moving .....

DeveloperPermalink Reply by Randy on January 31, 2012 at 5:11am

Valentin,

      The arduplane and the arducopter code is nearly exactly the same so that's very strange.  You definitely loaded arduplane on your skyfun plane?

     Could you try connecting your APM to your computer using the usb port.  Start the APMissionPlanner, then click to the terminal window and post what you see here?

Permalink Reply by valentin colon on January 31, 2012 at 9:29am

let try to post that out, anyways that is what I have been doing  conecting the apm usb por to my pc running the latest version of apm mission planner, and what I have, is all the info. gps, mode, compass

but no artificial horizon moving, reloaded code 2 or 3 times same results, this two board were working great on my sky fun last week...

DeveloperPermalink Reply by Randy on February 1, 2012 at 4:40am

Can you please go into terminal window and enter "setup", "reset", "Y" to erase your eeprom?

 

If that doesn't work can you try loading the arduplane code again to see if it still works?

Permalink Reply by valentin colon on February 1, 2012 at 7:56am

hi, randy I already did that twice with the same result, it look like microcontroller problem...

Permalink Reply by sai jeevan reddy on February 5, 2013 at 7:36am

even im facing the same problem!

please help me out!

DeveloperPermalink Reply by Randy on February 5, 2013 at 11:42pm

sai,

    jeepers...you must have found this year old thread through google or something. Which version of the software are you running?  2.9.1?  which board?  APM2.5+?

Permalink Reply by sai jeevan reddy on February 9, 2013 at 10:57pm

hello randy,

                  i have posted a thread regarding my problem but i didnt get reply.fortunately i found this thread and posted about my  problem.my board is 1280 and im using 2.6version arducopter code.please help me out.which code do u suggest to try?

thakyou

DeveloperPermalink Reply by Randy on February 10, 2013 at 1:33am

Sai,

    Sorry, but we don't provide support for the 1280 board anymore.  The ArduCopter 2.6 firmware is also quite old.

Permalink Reply by sai jeevan reddy on February 10, 2013 at 6:37am

sir but how should i solve my problem?

which code supports my 1280 board?

please help me out!

thankyou

DeveloperPermalink Reply by Randy on February 10, 2013 at 7:18am

Sai,

     You could use ArduPlane.  That still fits on the 1280 i think.  For Arducopter you're out of luck.  You could upgrade the bottom cpu board to a 2560.

     Personally though I think you should bite the bullet and buy an APM2.5+ or wait a month and buy a PX4 when all the information and software is ready for that board.