Replies to This Discussion

ModeratorPermalink Reply by Adam AKAV8R on April 12, 2012 at 5:24am

Info is here:

http://code.google.com/p/arducopter/wiki/APM2_Motor_order

Permalink Reply by Klaus Heinrich on April 12, 2012 at 6:05am

Hi Adam,

Thank you

Greetings Klaus

DeveloperPermalink Reply by Marco Robustini on April 12, 2012 at 5:25am

Use the Wiki, there's all info about this.
Anyway yes, you can, like in my X8.

Permalink Reply by Klaus Heinrich on April 12, 2012 at 5:55am

Hi Marc,

I had seen the new wiki page yet, a big thank you is very clear, ;)

What is better Octa X or X 8?

interfere with the propeller at the preliminary X 8? Power loss?

Greetings Klaus

Permalink Reply by Klaus Heinrich on April 17, 2012 at 6:46am

Hello Marc

Just got the APM 2 :)

look at the Mission Planner program no Firmenware for the X 8 octa quad. as you've donethat with your system?

Greetings Klaus

I coax and tested normal drive

current and Power absolutely the same :)

http://youtu.be/Q-GxtpMFIsA

DeveloperPermalink Reply by Marco Robustini on April 17, 2012 at 11:22am

Klaus, you must use Arduino 100 relax patch (play with the code), follow the instructions on the wiki for this, you can't upload the code from the Planner for X8.
X8 is only too small but loses something in power (minor payload), octo flat is much better.