Replies to This Discussion

Permalink Reply by Tim Young on August 5, 2012 at 8:05pm

I did try to search but came up with nothing.  Thank you for the link.  It's a shame you have to modify it and can't use it as is.

Permalink Reply by Bill Patterson on August 15, 2012 at 6:17am

Here's a cut and paste of my post on RC Groups:

Ok, I finally got it. I think the channels are mis-named at some point, and possibly only mix 6 and mix 7 work on the aux channels. I'm already 4 days of beep beep beep into it and can't stand to to any more testing right now.

So here's how I got the 3 Pos switch to work on the Stock FS-Th9X from Hobbypartz (purchased Aug 2012). There may or may not be a better choice for channels.

In Aux channels:
Channel 5 = Pit Trim
Channel 6= Hov Thro

In Prog Mix / Mix 6
Act
FLP
GYR
ID1
Go into TUNE and set it like this:
000
100
000
100
000

Now save all that and go to Mix 7
Act
FLP
GYR
ID2
Go into TUNE and set it like this:
100
000
100
000
100

Wah-lah. 3 Pos Switch works on channel 5.

Why it works, makes no fricken sense to me. The flaps (Hov Thro) still work independently and has no input to channel 5. I don't know. Maybe you don't even need it. I'm sick of testing, so maybe I'll beep some more later. Over on Aeroquad I saw someone had used mix 6 and 7 like this, which is where I got the this from. Thanks moeffe.