Replies to This Discussion

Permalink Reply by Antonie Kruger on January 7, 2013 at 9:21am

"Well-meaning friends Thanks again!" - yeah right.....I suppose the product will be called 3CR(C for china) Arduflyer quad.

Permalink Reply by miaofeifu on January 7, 2013 at 9:39am

Is not the case, I'm just a pure ACM enthusiasts, because the purchase inconvenient so only think of their own DIY, but no reference information, so to help everyone. If you can provide a more convenient way to buy, I am willing to buy, such as taobao.com, but we can not buy here. I'm different from other people, I do not sell anything, because I'm just an amateur.

Permalink Reply by R. D. Starwalt on January 7, 2013 at 10:09am

Are you referring to the original Arducopter with the many, many, plastic parts? If so there were drawings available though I cannot find them at this time.

The 3DR drawings of the current release (Version C) are not available. The B version was on the 3DR site for download.

Here is shot of the basic dimension of the B version (no copyright information was on the original plans - pull this post mods if told to).

The dimensions are in inches. The newest Ver C has shorter arms, different drilling pattern for the motors, and modifications for the central body. I am sure the tuning variables are adjusted for the reduction in moments.

I build all my *frames* (short for airframe) and I assume this is your meaning for 'rack'.

Good luck! You should be able to start your project with this basic information and some online research.

-=Doug

Permalink Reply by miaofeifu on January 7, 2013 at 10:27am

Thank you, I do not know there is a version of the distinction, as sales of goods, ask others to be very rude drawings.If this is the case, then I think about the other way, try to the community goods purchased again to see whether it can be successful.

3D RoboticsPermalink Reply by Chris Anderson on January 7, 2013 at 10:41am

The original ArduCopter designs are all here. Funny looking back at that one -- it sure was fiddly!

Permalink Reply by miaofeifu on January 7, 2013 at 11:07am

The rack on the link you provided is not what I want, I sent a photo for everyone to see it, in fact, that rack is pretty.

Permalink Reply by R. D. Starwalt on January 7, 2013 at 11:28am

That is the C version of the 3DR Arducopter. The drawings are not available on the website.

The arms of the C *frame* (not rack) are shorter than the B version.

-=Doug

Permalink Reply by miaofeifu on January 7, 2013 at 11:08am

Or thank you!