Hello,

I have big problem with running that 

I have connected receiver to APM, on MP i can calibrate and all works

But i don't have any reaction on output, servo don't work thro don't work :-(

I'm in Heli mode

Please help 

Jarek

Views: 96

Replies to This Discussion

Silly question for you, did you power your servos with a ubec? The apm 3.1 only sends a signal and not power. You need to power your servos

If you mean heli mode on transmitter, don't use that. Use a normal fixed wing aircraft setting.

I have connected but something is wrong that same is with ESC can't start showing error like without connection to the receiver

Brian Bourdeau said:

Silly question for you, did you power your servos with a ubec? The apm 3.1 only sends a signal and not power. You need to power your servos

Ok i will try 



Mike said:

If you mean heli mode on transmitter, don't use that. Use a normal fixed wing aircraft setting.

RSS

© 2017   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service