jalves's Discussions (13)

Search Forum

View

Discussions Replied To (15) Replies Latest Activity

"David, I measured the voltage in the CH4 IN pins ( a soldered board ready to 2.7.1 w…"

jalves replied Feb 21, 2012 to Signal 4 short to VCC

 1 Feb 21, 2012
Reply by jalves

"Theo, Connect the gps RX line to the Ap. If all went well, the Ap will setup the g…"

jalves replied Jan 27, 2012 to Ardupilot that get no Sat Lock

 37 Oct 22, 2012
Reply by Charles lakins

"Theo, If it is so (38400, NMEA output) try it with only GND, Vc and Tx connect to t…"

jalves replied Jan 26, 2012 to Ardupilot that get no Sat Lock

 37 Oct 22, 2012
Reply by Charles lakins

"That is because remzibi osd gps unit works at 38400 (same as the Ap latest software)…"

jalves replied Jan 26, 2012 to Ardupilot that get no Sat Lock

 37 Oct 22, 2012
Reply by Charles lakins

"Theo, Check this photo: http://ardupilot.googlecode.com/svn/images/wiring_jumpers.p…"

jalves replied Jan 26, 2012 to Ardupilot that get no Sat Lock

 37 Oct 22, 2012
Reply by Charles lakins

"Theo, I remember reading in the past some problem related with shield, gps and the l…"

jalves replied Jan 25, 2012 to Ardupilot that get no Sat Lock

 37 Oct 22, 2012
Reply by Charles lakins

"No, You have to change something because right now the Ap board is useless. Test th…"

jalves replied Jan 24, 2012 to Ardupilot that get no Sat Lock

 37 Oct 22, 2012
Reply by Charles lakins

"Theo, I had to be sure and I went and check my model, after all I am using TWO(2) di…"

jalves replied Jan 24, 2012 to Ardupilot that get no Sat Lock

 37 Oct 22, 2012
Reply by Charles lakins

"don't forget the diode! I connected the Vc pin to the backup pin, IIRC the unit does…"

jalves replied Jan 24, 2012 to Ardupilot that get no Sat Lock

 37 Oct 22, 2012
Reply by Charles lakins

"Hum! My locosys (LS20023) is powered with 5V through 1 diode (connected to the osd,…"

jalves replied Jan 24, 2012 to Ardupilot that get no Sat Lock

 37 Oct 22, 2012
Reply by Charles lakins

RSS

Social Networking

Top Content 

1 Mapping Mission Ride Along

Mapping Mission Ride Along
2 ArduPlane 2.73 released

ArduPlane 2.73 released
3 Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)

Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)
4 3 axis Camera Gimble connections.

3 axis Camera Gimble connections.
5 ArduVTOL - Wingcopter - Flight Report Nr.1

ArduVTOL - Wingcopter - Flight Report Nr.1
6 Alt_hold and loiter acting crazy

Alt_hold and loiter acting crazy
7 DroidPlanner for Android The best missionplanner alternative! Using Mavlink via cheap usb adapter (Follow me - PIDS - ACC calibration - FREE)

DroidPlanner for Android The best missionplanner alternative! Using Mavlink via cheap usb adapter (Follow me - PIDS - ACC calibration - FREE)
8 New micro-cameras emulate insects' compound eyes

New micro-cameras emulate insects' compound eyes
9 HD video for UAV's

HD video for UAV's
10 Thirty Days (#13): Y6 in-flight motor failure tests

Thirty Days (#13): Y6 in-flight motor failure tests

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service