Share 'How to connect 3DR GPS uBlox to Raspberry Pi'
Here is my connection (You can check GPIO pinout here):
I used theFTDI GPS adapter cable, solder pads can be used also, just have in mind the TX pad = RX Ublox and RX pad = TX Ublox.
To get information from GPS in the Raspberry Pi (RPi), we will use gpsd.
Open a terminal
sudo apt-get install gpsd gpsd-clients python-gps
Setup RPi UART:
sudo nano /boot/cmdline.txtdelete the "tty…
You can share this blog post in two ways…
Share this link:
Send it with your computer's email program: Email this