JDrones Comment by Jani Hirvinen on August 2, 2010 at 7:38pm

Sandro, that looks just stunning :)

Comment by Romee Rey Calderon on August 7, 2010 at 7:03am

@ sandro

i noticed that the solder jumper on the mag is still on 3.3V. I've read here that we have to change the jumper to 5V if connected to the I2C port at the back of that port. may i know if the "no gps" port is 3.3V? thank you

Developer Comment by Sandro Benigno on August 7, 2010 at 8:22am

Even for attach it with cable, you will need to change the jump, because the EM406 connector share the same +5V power line.

Developer Comment by Sandro Benigno on August 7, 2010 at 8:36am

@Romee: I added a warning at description. Thank you for show me that. ;)

Comment by majorpr13 on August 15, 2010 at 8:48pm

Is it possible to get the eagle layout for this magnetometer??

Comment by roger on December 18, 2010 at 6:43am

Hi! How do I exactly change the voltage from 3.3v to 5v? Add more solder on the left and remove the extra solder on the right side of the magneto jumper? Any help would be appreciated. Thanks.

Comment