"Hi,Adam
Can you share your LabVIEW project ? I really like it ."
Adam Amos's Discussions
When is the next T3?
Started this discussion. Last reply by Adam Amos Mar 14, 2011. 2 Replies 0 Likes
Hi Guys, When is the next T3 comp? I am finally in a position to put some serious effort into my UAV woohoo! -AdamContinue
Tags: T3
Adam Amos's Page
Latest Activity
Peter Bird commented on Adam Amos's blog post Semi successful manual flight - Rescue Robotics (2010OBC)"I had the same problem with my Maja motor burnt out very quickly! What solution did you come to with propeller/motor sizing?"
Anthony Schnabel commented on Adam Amos's blog post IP Camera Viewer Software Development Update"Can you upload the`software` you developed"
AdminThomas J Coyle III commented on Adam Amos's blog post Autopilot and Ground Station Almost There
"@Adam,
Most of the members here who develop software are offering it to members as Open Source. If you intend to commericalize the software in your project, then maybe you need to make that clear in your blog. Otherwise you might offer to make…"
Adam Amos commented on Adam Amos's blog post Autopilot and Ground Station Almost There"Hi Thomas,
I haven't really thought about making it open source so I will have to get back to you on that.
Do you think people would want it?"
AdminThomas J Coyle III commented on Adam Amos's blog post Autopilot and Ground Station Almost There
"@Adam,
Does your last comment mean that this project is not Open Source?
Regards,
TCIII"
Adam Amos commented on Adam Amos's blog post Autopilot and Ground Station Almost There"Thanks Patch!
Earl, I have no plans to post the code however I am happy to help you with anything specific.
-Adam"
Earl commented on Adam Amos's blog post Autopilot and Ground Station Almost There"Can yoy post the Labview proj code ?
Earl
"
Patch Thompson commented on Adam Amos's blog post Autopilot and Ground Station Almost There"Adam, great work; The GCS screen looks really clean and intuitive, IMHO. (The catapult & pelican make a nice package too; really quite pro!). Keep us posted on developments.
"
Adam Amos posted a blog postAutopilot and Ground Station Almost There
Hi Guys, I have been working on a LabVIEW based autopilot for a while now and it is just starting to come together. So to bring you up to speed:The Ground Station is now working.The FPGA based autopilot is now at a stage where it is ready for gain tuning, ground testing and semi-autonomous flight.Interface electronics has been debugged and is almost complete. I put the drone in the back of the car and took it for a ride around the block, everything seems to be working which is…See More
Adam Amos commented on ReAllocate's blog post Attention Unmanned Aerial Vehicle Experts (and General Do-Gooders)!"I'm keen!"
Adam Amos commented on Adam Amos's blog post Rescue Robotics OBC2012 Update"Hi Zachary,
You can order the Maja and the launcher from the Bormatec online shop http://www.bormatec.com/xtc/"
"Where do you buy Maja plane type and how much?"
Adam Amos commented on Adam Amos's blog post Rescue Robotics OBC2012 Update"The foam is quite porous so the vents still work but I will keep an eye on it and hack out some more foam if the temp gets too high.
"
Profile Information
- About Me:
- 2010 OBC entrant
LabVIEW CLAD
Paparazzi
- Tell us a bit about your UAV interest
- rescuerobotics.com.au
- Hometown:
- Sydney
Adam Amos's Blog
Autopilot and Ground Station Almost There
Posted on November 8, 2012 at 5:00am 7 Comments 2 Likes
Hi Guys,
I have been working on a LabVIEW based autopilot for a while now and it is just starting to come together.
So to bring you up to speed:
- The Ground Station is now working.
- The FPGA based autopilot is now at a stage where it is ready for gain…
Rescue Robotics OBC2012 Update
Posted on July 8, 2012 at 4:53am 6 Comments 1 Like
It has been going well but I think I will be very pushed for time to make the deadline for the next deliverable.
Lots more pics here:…
Continue Microstrain 3DM-GX3-45 Integration
Posted on July 4, 2012 at 12:00am 0 Comments 2 Likes
Hi Guys, I have been a bit slack with my updates lately. The Microstrain AHRS has been integrated onto the plane and the driver for LabVIEW real-time is working however I have run out of time to develop it for FPGA. I got it mostly working in FPGA but that last 20% was taking too much time so I just went for easy the RT driver that I had already made.…
Maja Launcher and Bottle Drop for OBC2012
Posted on April 9, 2012 at 7:30pm 2 Comments 2 Likes
Hi All, Just a quick video showing the Maja launcher & bottle drop mechanism in action ahead of Deliverable 2 for the OBC2012.
More info on the website: www.RescueRobotics.com.au
Comment Wall
- No comments yet!
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
Andropilot Users Group
203 members
-
Moderators
24 members
-
ArduRover User Group
207 members
-
Japan ArduCopter Group
58 members
-
ArduCopter User Group
1355 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
