"Android GCS is very far behind, you should rather contribute to Andropilot, a very promising, and well working alternative."

"Hi, Still Access Denied. Anyway, somebody to find errors in software has only very specific things (the code) to look at and he needs very specific input such as: Hardware and software versions Descriptions of the UAV setup, the ground station and…"

"Hi Soren. I reload the zip file. In case it says “access denied” again, I also uploaded the file in the following link. The file name is APM.rar. http://home.anadolu.edu.tr/~zoznalbant/common/ Best Regards, zafer  "

""Access Denied"..."

"Hi Soren, This is Zafer. You asked Andre for the files but I thought I have the same problem and attached some pictures and log files I recorded. I hope I do not disturb you. “Pictures” looks a bit complicated but number 04 and 14 are…"

"Not good, it's accuracy will be reduced and vary with attitude and direction."

"Hi, There's talk of planes but also of ArduCopter in this thread... Which aircraft firmware is it really, and which version? Andke can save the mission to a file and attach that? Regards Soren"

"Hello Terje. Could you solve the problem? I have a similar problem with my APM 2.0 plane. I checked everything twice, controlled every waypoint one by one (write and read back from APM), but when I switch on the autopilot, my plane does not follow…"

"yes, most decent devices handle it just fine. Galaxy Note 10.1  occasonaly complains about it being a high-power device, but a reconnection fixes that (only n-rush current) Galaxy Note 2 works fine every time, and regarding Note2's DC-DC…"

"Regarding subject; First, learn to fly well without fpv."

"Hi, regarding the altitude, I do not really remember - but I think that got fixed a long time ago so that it zeroed when arming."

"I submitted this, http://code.google.com/p/arducopter/issues/detail?id=578&thanks=578&ts=1367308800"

"Yes, I've seen mode switch crashes as well, motor stop. Always after loiter is unstable. Last crash happened when quitting follow mode, which is a guided mode.. See https://github.com/geeksville/arduleader/issues/66 for my logs. I also had…"

"the AHI moving is normal, and will go away when GPS have a solid lock. why it is so, I don't really know."

"according to the shop: Switching regulator outputs 5.3V and 2.25A max Max = B.S., it does not mention if it's 100ms or longer. we would need to know continious load , or even at a certain temperature. OSD hogs power due to the old MAX chip,…"

"Not sure about the voltage regulator specs. But is it hot ? It might be a thermal shutdown if its a linear regulator."