"Right now the only RSSI is for the Recever of the Radio control. However if the APM sends it out the Miniosd could read it. Looks like the message MAVLINK_MSG_ID_RADIO 166 Would have to be added in the code, then new values…"

"Right now I don't think it's causing any degrading of the auto pilot, I would like to see a new mavlink message just for osd. We could save some programming space it we just have to decode one or two messages, unlike now, I belive 6…"

"Kevin, Merlin, & Steven What you are asking for has been done, however it was never included in this version, as space has all but run out in the chip. On the version that I fly I have the MAH used displayed, and the % of Battery. To get around…"

"Andrew First Great work. Glad to see 2.67, plan on trying the MP upload to see how it works on Sunday. Been using a complied version for a few days, testing on AMP1 for a new plane. At this rate I'm not going to have a reason to keep Arduino…"

" Djalma C Jr have you read this https://code.google.com/p/minimosd-extra/wiki/RSSI Section 2 tell you how to read the raw values, and configure your Miniosd to work correctly. I'm sure that now that 2.67 has been released Gábor will…"

"many thanks! I'm sure a few of us will use it alot. Burt"

"Ian till a change can be made here are some code changes that you can replace and compile and get what you would like.Copy the sections over the areas in the "OSD_Panels". Notice converth was changes to a fixed value, same with…"

"Andrew Thanks ! :> Saw the changes for the RSSI in the source code, don't fullly understand it, but also looks like it needs a change in the mission planner for parameters (167)? If so could the RSSI for the RX for plane control also be…"

"I agree! I have send a email to AMA to tell them that I won't be renewing my membership next year without a real look at their new FPV/UAV rules. The VLOS just doesn't work for us."

"Mack I had something very simular, mine was on pressing the reset button. I would get the splash screen, then the waiting for heartbeat, then blank. Nothing I did would bring it back to display the screens. I wish I could tell you why, but I was…"

"Navigant Are you trying to get RSSI in the mission planner? If so I don't think it supports it yet. The RSSI and RemRSSI are for the 3DR Radio set. I was thinking the same thing, but was getting RSSI on my OSD and on my ANT Tracker, but always…"

"Todd You only need the HEX file. If you have the arduino interface working, you can just upload from it and use the MP to just change you settings. Burt  "

"Todd Did you copy the libraries to the Arduino libraries dir? This is the most common problem. The next most common problem is selecting the wrong board to compile. Attached is a hex I'm using, but remember you use it at your own…"

"Todd For question #1, add the lines to the APM_Config.h file, for question #2 I use the Arduino software, there is info on the Wiki on how to use it. I am using 1.0.1 and it works for me. After you load Arduino be sure that you copy the libraries…"

"Jack The default timer reset only worked half of the time, so my change. However, It sounds to me like what you want is say thr above 25% for say 5 seconds, resets timer, and locks so can't reset again? That sounds like a better idea. I wanted…"

"Gábor & Jack I have tried something like what Jack wanted. See the code below     if (takeofftime == 0 && (osd_alt - osd_home_alt) > 5 && osd_throttle > 25)   …"