Hello,I just finished building a 250 X quad a few days ago, did some short flight on Stabilize, and today I decided to try the Loiter / RTL mode and crashed it. I am pretty new to this so some help…Continue
"Right looked at the RCIN for number 3 which is throttle.
Normally when you purchase a flight controller there is just some default code on it. You use Mission Planner to load what you type of device your going to install it on. If…"
"Thanks for the reply!
That's the version the pixhawk comes with, should I update from the mission planner? I really just want a stable quad, no need to cutting edge functions for now. Also, is it hard to backup the firmware? Is it necessary to…"
"First off you are running beta code. 3.5. dev
It looks like it was flying good and while in loiter mode you selected RTL. When you select this mode the copter started to gain altitude as the RTL height is set at 15. The thing with a 250…"
Hello,I just finished building a 250 X quad a few days ago, did some short flight on Stabilize, and today I decided to try the Loiter / RTL mode and crashed it. I am pretty new to this so some help analyzing what I did wrong and/or what failed would be great!Here's the logs 2017-04-13%2021-55-55.bin …See More
"To be honest I don't have much idea, and I just hope it can help with landing.
For the Maxbotics senors the doc said to use them in analog mode? This one doesn't seems to have a mode switch. :/
Can I connect it using one of the AUX…"
"Yes, the Maxbotics sensors are also either PWM or Analog voltage output.
BTW, those Radio Shack sonar sensors are terrible (noisy, short range, wide angle) and I can't think of any application where I'd use them. What do you have in…"