We tried to auto-level our UAV but after the process something went wrong. Before that the ailerons and the pitch elevator worked well in Stabilized mode "in the room" but now they operate really slowly. We reseted everything to…"
"We also tried to compile the source code with Arduino and got the following error message:
In file included from C:\Users\Joe\Documents\Arduino\Arduino Sketchbook\libraries\FastSerial/BetterStream.h:16, from C:\Users\Joe\Documents\Arduino\Arduino…"
"Thanks for the answer!
We already use the DO_SET_RELAY command for image taking but this way too many images are taken.
So an image in every 2nd or 3rd second would be enough but there is no command for this. We guess that the DO_REPEAT_RELAY turns…"
Thanks for your fast help again!
1.In this log the mission was broken (around waypoint 4 or 5) after that I set the waypoints manually in the APM.
2.I'll check the cables tomorrow.
3. Ok I was a bit confusing:D. When you turn on…"
Everything is quite right now, we got through the tunning process and our plane flies like an eagle :D. We have been testing it almost every day and have recognized some problems which occur so often. The first thing is that…"
Many thanks that you are engaged with our problem. I hardly have any experience in model plane building and driving. We want to use the plane for photogrammetric purposes and I am responsible for it. My boss has basic knowledge in…"
We made an EEPROM reset today and after that a short flight with 5 waypoints (preplanned in APM) too.The plane had a strange bahavior although it did not make the "diving effect". It tried to find the waypoints…"
We had the same problem although we use the 2.23 firmware version. I attached the log file (at 20 % you can see the Auto mode) In Stabilized mode everything is perfect. We don't want to change the firmware version until we make sure…"